Boxster S (987) F6-3.4L (2008)
INFORMATION: Make sure that the wiring harness is not twisted through the door opening when fitted.
2. Push the wiring harness from the inside through the door aperture and press in the rubber grommet on the wiring harness from inside into the door
aperture.
3. Install the rubber grommet for electric lead -1- and bowden cable -2- in the unit carrier until this engages all the way around.
4. Screw down fastening screws -2- for the door unit carrier -1-. Tightening torque, Final tightening: 7.2 ftlb.
5. Press in power windows -1- on door unit carrier -2- -arrows-.
Locking electrical plug connection