Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-875002.png)
5. Remove servo motor.
Installing servo motor for emergency release
1. Engage the cable retaining pin at the servo motor and clip it in.
2. Position servo motor and secure with the fastening screws. Tightening torque: 9.7 Nm (7.2 ftlb.)
3. Push electric plug onto the servo motor until it is felt to engage.
Subsequent work
Subsequent work on servo motor for emergency release
Refer to Removing and installing front apron.
