Boxster S (987) F6-3.4L (2008)
Trunk / Liftgate Motor: Service and Repair
Removing and installing rear lid release motor
Preliminary work
1. Remove trim panel on luggage compartment pan. Refer to Removing and installing rear luggage compartment trim.
Removing rear lid release motor
Detaching bowden cables
1. Press out lock washer -1- (-arrow A-) and press bowden cables -2- out of the lower part of the rear lid lock -3- (-arrow B-).
Removing rear lid release motor
1. Pull lid release motor -1- forward behind the spoiler drive -arrow B- until the connector -3- is easily accessible.