Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-888001.png)
Body Emblem: Service and Repair
Removing and Installing the Rear Logo
Removing And Installing The Rear Logo
Tools
Technical values
Removing the rear logo
1. Heat the rear lid
1.1. Heat the rear lid -1- in the area of the logo -2- using the hot-air gun v.a.g 1416 -3-.
2. Lifting up the logo using a plastic wedge
2.1. Move a plastic spatula -1- under the logo -2- and lift it up.
