Boxster S (987) F6-3.4L (2008)
3. Screw on fastening nuts -2- and tighten to the specified tightening torque. Final tightening: 1 ftlb.
Installing heat protection cover
1. Insert heat protection cover -3-.
2. Screw on fastening screw -1- and tighten to tightening torque. Tightening torque: 1.5 ftlb.
3. Screw on fastening nuts -2- and tighten to the specified tightening torque. Tightening torque: 1 ftlb..
Subsequent work
Install rear wheel. Refer to Removing and reinstalling wheel.