Boxster S (987) F6-3.4L (2008)
Removing and installing support plate
Removing support plate
1. Raise the vehicle at the prescribed jacking points.
2. Remove rear underbody panel.
3. Remove right and left diagonal braces -B- and the support plate -A-. Pull out the support plate -A- without undue force.
Support plate
Installing support plate
1. Insert support plate -A- without undue force.
Support plate
2. right and left diagonal braces -B-.
3. Tighten screws and nuts to the specified torque.
4. Fit rear underbody panel.