Boxster S (987) F6-3.4L (2008)
2. Fasten carpet -1- at the bottom in the area of the A-pillar -Arrow B- Double-sided adhesive tape or suitable adhesive.
Installing front side section trim panel (driver's side)
1. Insert side section trim panel -3- einsetzen -Arrow A- and screw down with the fastening screws -2-. Tightening torque: 2.0 ftlb.
2. Insert the fuse carrier cover -1- with both clips -4- into the lateral side section trim panel -2- and clip in -Arrow B-.
Removing and Installing Instrument Panel
Removing And Installing Instrument Panel
Technical values
Preliminary work
1. Remove steering wheel. Refer to Removing and installing steering wheel
2. Remove trim panel under dashboard. Refer to Removing and installing dashboard trim panel
3. Remove dashboard insert. Refer to Removing and installing dashboard insert
4. Remove passenger's airbag unit. Refer to Removing and installing passenger's airbag unit
INFORMATION: Only for vehicles with stopwatch.
5. Remove stopwatch. Refer to Removing and installing stopwatch
6. Remove front loudspeakers. Refer to Removing and installing front loudspeaker
7. Remove oddments tray. Refer to Removing and installing oddments tray
8. Remove switch console. Refer to Removing and installing switch console
9. Remove display and PCM operator control unit. Refer to Removing and installing display and PCM operator control unit
10. Remove dashboard mouldings. Refer to Removing and installing dashboard moulding
11. Remove central locking switch. Refer to Removing central locking switch