Boxster S (987) F6-3.4L (2008)
Rear Shelf: Service and Repair
Removing And Installing Rear Wall Trim Panel
Preliminary work
Remove trim panel for convertible top rest/engine compartment lid. Refer to Removing and installing trim panel for convertible top rest
Removing rear wall trim panel
1. Move front seat all the way forward.
2. Unscrew fastening nuts -1-.
3. Loosen rear wall trim panel -2- at the sides from the side trim panel -Arrow A- and lift up and out -Arrow B-.
Installing rear wall trim panel
1. Position rear wall trim panel -2- -Arrow A- and insert sides between the body and side trim panel -Arrow B-.
2. Screw in -1- fastening nuts.
3. Move front seat back to the initial position.
Subsequent work
Install trim panel for convertible top rest/engine compartment lid. Refer to Removing and installing trim panel for convertible top rest