Boxster S (987) F6-3.4L (2008)
Trim Panel: Service and Repair
Removing and Installing Service Tray
Removing And Installing Service Tray
Technical values
Preliminary work
1. Remove luggage-compartment trim panel (bulkhead). Refer to Removing and installing rear luggage-compartment lining
2. Drain coolant. Refer to Draining and filling coolant
Removing service tray
WARNING: Danger of scalding with hot engine oil.
-
Allow engine and components to cool down.
-
Avoid contact with the skin and eyes.
-
Wear suitable protective clothing.
WARNING: Coolant is corrosive and hazardous to health.
-
Risk of skin and eye irritation.
-
Wear protective gloves and goggles.
-
If you come into contact with coolant, wash off immediately with plenty of warm water.
1. Pull off water and oil hose.