Boxster S (987) F6-3.4L (2008)
Removing and Installing Side Trim Panel
Removing And Installing Side Trim Panel
Removing side trim panel
1. Unscrew fastening screw 1.
2. Unclip plastic clip 2 in the direction of arrow A.
3. Lift side trim panel up 3 and off.
Installing side trim panel
Installation position for rear side trim panel ILLUSTRATION
1. Check support 4 and replace if necessary.
2. Position side trim panel 3 and clip in plastic clip 2.
3. Screw in fastening screws 1.