Boxster S (987) F6-3.4L (2008)
2. Lay fold placer -2- over the push rod -3-, position on convertible top frame and tighten with the fastening screw -1-. Tightening torque: 1.8 Nm
(1.5 ftlb.)
Fastening the convertible-top covering at the sides of the roof frame
1. Lay the convertible-top covering -2- to the front and guide the shaped sheetmetal part into the roof frame from above.
2. Fasten the convertible-top covering -2- with the fastening screws -1-, starting from the front bottom side of the roof frame. Tightening torque : 3.5
Nm (2.5 ftlb.)
Fastening convertible-top covering at front