Boxster S (987) F6-3.4L (2008)
1. Unscrew the four fastening screws -1- and remove backrest side support -2-
Removing motor for backrest adjustment
1. Unclip inner spring for backrest frame -1- at the drive shaft -2- ( -arrows B- ) and swivel it upwards ( -arrow C- ).
2. Turn plug connection -3- approx. 90 degrees anti-clockwise -arrow D- and remove it from the backrest frame -arrow E-.
3. Release plug connection -3- ( -arrows a- ) and disconnect it -arrows F-.
4. Unscrew the two fastening screws -1- and remove motor for backrest adjustment -2-.