Boxster S (987) F6-3.4L (2008)
6. Pull the long drive shaft -2- out of the gear mount -arrow B- and check for damage.
7. Pull the short drive shaft -1- out of the gear mount -2- and check for damage.
Installing motor for seat adjustment
1. Insert the short drive shaft -1- into the gear mount -2- by twisting slightly.
2. Insert the long drive shaft -2- into the gear mount -arrow A- by twisting slightly.
INFORMATION: When installing the motor for seat adjustment, make sure the two seat rails are in the same position.
3. Push motor for seat adjustment -1- and sleeve onto the long drive shaft -2- by twisting slightly -arrow A-.