Boxster S (987) F6-3.4L (2008)
6. Press cover for backrest -1- into the backrest shell -2- lower left and right using a screwdriver -3-.
Installing guide for seat belt
INFORMATION: If the backrest cover -1- has been replaced after repairs, the seat-belt guide mounting points must be measured again and marked.
-
Mark upper mounting point with the dimensions -A= 95 mm- and -B= 50 mm-.
-
Mark lower mounting point with the dimensions -C= 25 mm- and -D= 155 mm-.
1. Position seat-belt guide -1- with sleeve -5- with the aid of the marking on the backrest cover.
2. Tighten fastening screw -3- with spacer -4-.