porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Rear Spoiler|Page 5113 > < Removing and Installing Rear Spoiler|Page 5111
Page 1
background image

Spoiler: Service and Repair
Removing and Installing Rear Spoiler (I-No. XAL)

Removing And Installing Rear Spoiler (I-No. XAL)

Technical values

Removing rear spoiler

INFORMATION:

-

The rear spoiler extends at speeds of approximately 120 km/h and retracts again at approx. 80 km/h.

-

The rear spoiler decreases drag and reduces rear-axle lift especially at higher speeds.

-

The warning lights illuminate for a lamp check when the ignition is switched on. The warning lights in the instrument panel and the on-board
computer light up if the rear spoiler does not extend or reach its end position.

1. With the ignition switched on, extend the rear spoiler manually using the rocker switch in the passenger compartment. Switch off ignition.
2. Carefully unclip the cover at the right and left -2- and take them out of the rear spoiler -1- ( -arrow- ).

Removing and Installing Rear Spoiler|Page 5113 > < Removing and Installing Rear Spoiler|Page 5111