Boxster S (987) F6-3.4L (2008)
4.3. Adjust gap dimension B if necessary by screwing the lifter-rod adjusting screw at the left and right in [by max. three turns (approx. 3 mm)] or
out -arrow-.
4.4. With the ignition switched on, extend the rear spoiler manually using the rocker switch in the passenger compartment. Switch off ignition.
5. Screw on fastening nuts on rear spoiler. Tightening torque: 23 Nm (17 ftlb.)
6. Clip the cover at the right and left -2- into the rear spoiler -1- ( -arrow- ).
7. With the ignition switched on, retract the rear spoiler by actuating the rocker switch in the passenger compartment. Switch off ignition.