Boxster S (987) F6-3.4L (2008)
Dowel pin for valve for camshaft timing
3. Lightly coat seal of retainer plate with engine oil and slide it over the hydraulic valve.
Installation position of retainer plate for solenoid hydraulic valve for camshaft timing
4. Position two M6 x 20 inner Torx screws complete with holder -A- on the valve and tighten the screws. Observe installation position of the cable
terminal (to intake distributor). --> Tightening torque: 7.5 ftlb.
Holder for solenoid hydraulic valve for camshaft timing
5. Push cable plug onto the hydraulic valve. Make sure that the plug engages audibly.