Boxster S (987) F6-3.4L (2008)
Preliminary work for bearing cover for intermediate shaft
Preliminary work for bearing cover for intermediate shaft
Information
^
Note the work instructions for disconnecting and reconnecting the battery.
1. Disconnect the battery.
2. Drain engine oil.
Tiptronic:
3. Remove automatic transmission.
4. Remove drive plate for converter.
Manual transmission:
5. Remove manual transmission.
6. Remove clutch.
7. Remove double-mass flywheel.
Removing bearing cover for intermediate shaft
Removing bearing cover for intermediate shaft
Caution
Timing chain may jump over.
^
Risk of engine damage
-->
Following removal of the chain tensioner, the crankshaft must not be turned under any circumstances.
Information
^
For checking with the adjusting gauge, the timing adjustment must be correct.
Information
^
To make it easier to remove the bearing cover, spray the sealing surface with anti-rust agent.