Boxster S (987) F6-3.4L (2008)
Assembly sequence for piston-pin circlip
5. Press circlip into assembly tube using the assembly aid 9500/3.
Application of tool 9500/3
6. Position assembly tube on piston eye and press piston-pin circlip into the ring groove using the pressure pin assembly tool 9602/1. The circlip
must audibly engage.
Assembling piston pin circlip
7. Check installation position and secure fit of circlip. The lug of the circlip must always be touching the contact surface running in the direction of
the oil piston shank opposite the piston ring grooves.