Boxster S (987) F6-3.4L (2008)
36. Align connecting rod using the centering mandrel 9608 as required.
Aligning connecting rod
37. Coat cylinder bore with new engine oil. Place piston 6 on cylinder bore 6 using the universal piston ring restraining strap, 75-125 mm NR.55.
Piston in cylinder bore
38. Pay attention to direction of assembly: arrow on piston crown always points to flywheel side
Piston - installation position in crankcase
Caution
Incorrect and careless assembly of pistons.
^
Component damage (pistons, piston rings, cylinder line)
-->
Assemble pistons carefully and gently.
-->
Stop process immediately if there is increased resistance during assembly; eliminate the cause of the problem.
39. Hold the piston ring restraining strap firmly and press piston into a cable into the cylinder bore using a plastic mandrel until the piston touches the
centering mandrel.