Boxster S (987) F6-3.4L (2008)
Pressure pin in assembly tool
44. Oil piston pin -3- with new engine oil and place it in an upright position on a clean surface on the workbench. Position assembly tube with circlip
-1- and pressure pin on piston pin.
Assembly tool on piston pin
45. Press piston-pin circlip with pressure pin -1- onto piston pin; while doing so, press assembly tube -2- firmly onto piston pin. This will move the
piston-pin circlip into the correct installation position.
Moving piston-pin circlip into installation position
46. Check installation position of piston-pin circlip in assembly tube.