Boxster S (987) F6-3.4L (2008)
Inserting piston-pin circlip for cylinder 5
54. Push two spacer sleeve onto the assembly tube for the assembly of pistons pins and circlip on cylinder 4.
Spacer sleeves for cylinder 4
55. Fit the piston-pin circlip for cylinder 4 using two sleeves.
Inserting piston-pin circlip in cylinder 4
56. Once the pistons have been installed, seal the bore for the piston pin and circlip assembly on the crankcase using the aluminum screw plug and
new sealing ring. --> Tightening torque: 80 Nm (59 ftlb.)