Boxster S (987) F6-3.4L (2008)
1
Remove manual transmission --> Workshop Manual '343519 Removing and installing transmission - chapter on "removing"'.
2
Remove clutch --> Workshop Manual '305019 Removing and installing clutch - chapter on "removing"'.
3
Remove double-mass flywheel --> Workshop Manual '136019 Removing and installing double-mass flywheel - chapter on "removing"'.
Tiptronic:
4
Remove automatic transmission --> Workshop Manual '373519 Removing and installing automatic transmission - chapter on "Removing"'.
5
Remove drive plate for converter --> Workshop Manual '136319 Removing and installing drive plate for converter - chapter on "removing"'.
Subsequent work for crankshaft sealing ring on flywheel side
Manual transmission:
6
Install double-mass flywheel --> Workshop Manual '136019 Removing and installing double-mass flywheel - chapter on "installing"'.
7
Install clutch --> Workshop Manual '305019 Removing and installing clutch - chapter on "installing"'.
8
Install manual transmission --> Workshop Manual '343519 Removing and installing transmission - chapter on "installing"'.
Tiptronic:
9
Install drive plate for converter --> Workshop Manual '136319 Removing and installing drive plate for converter - chapter on "installing"'.
10 Install automatic transmission --> Workshop Manual '373519 Removing and installing automatic transmission - chapter on "Installing"'.
Disclaimer