Boxster S (987) F6-3.4L (2008)
Blower Motor: Service and Repair
Removing And Installing Fan
Preliminary work
Preliminary work for heating and fresh air blower motor
Removing heater/fresh-air blower motor
Set blower to position 0 on climate control and remove ignition key.
1. Unscrew the two fastening screws -1- of support strut and remove support strut.
2. Squeeze the plug -a- on the blower motor and pull off.
3. Unscrew the two fastening screws -2- holding the blower motor cover.
4. Remove the cover -3- for the blower motor and pull out the blower motor downwards.
Installing heater/fresh-air blower motor