Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-741002.png)
INFORMATION: If the cover of the heat exchanger is damaged during removal, it must be replaced.
2. Check the seal at the cover of the heat exchanger and repair using a commercially available butyl adhesive or replace if necessary.
3. Push the cover over the connections of the heat exchanger and press into place against the body, making sure it fits securely.
4. Push coolant hoses onto the heat exchanger and secure with fastening clamps.
Subsequent work
Subsequent work for heat exchanger
Install left and right dome strut.
