Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-1043001.png)
Dome Lamp Bulb: Service and Repair
Removing And Installing Bulb For Interior Light
Removing bulb for interior light
Removing interior light
CAUTION:
Danger of damage to property if bulbs are used or handled incorrectly.
-
Risk of damage to bulbs and bulb housing.
-
Switch off ignition and remove ignition key.
-
To prevent short circuits, the load in question must be switched off while changing bulbs.
-
Only bulbs specified in the bulb table may be used.
-
Bulbs with a higher wattage may damage the bulb housing.
-
New bulbs must be clean and free of grease. Therefore, never touch the bulbs with your bare hands. Use a cloth or soft paper when changing bulbs.
-
In certain states, it is compulsory to carry spare light bulbs.
1. Carefully loosen interior light -1- with a small screwdriver -Arrows A and B- and pull downwards out of the front lock -Arrow C-.
2. Release connector -1- on interior light -Arrow a- and pull it off. -arrow-.
Removing bulb for interior light
