Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-176003.png)
5. Clean oil filter housing -1- thoroughly both inside and outside. Replace O-ring -3- with a new one and smear lightly with white Optimoly MP3
lubricant (available from the Porsche Parts Catalogue).
Oil filter components
^
1 - Oil filter housing
^
2 - Oil filter cartridge
^
3 - O-ring
6. Insert a new filter element.
7. Screw in the oil filter housing with the special release key 9204 and tighten it. --> Tightening torque: 19 ftlb.
Refilling engine oil
Filling in engine oil
Caution
Incorrect oil level
^
Damage to engine and catalytic converter.
-->
Always observe specification for oil fill quantities.
Information
Use only engine oils tested and approved by Porsche AG.
Caution
Lid for engine oil filler neck loose.
^
Warning light in instrument cluster (check engine).
^
Spinning oil in engine or luggage compartment
-->
Close the lid carefully.
1. Fill the engine oil slowly using a suitable filler container to prevent the oil from overflowing at the filler neck. Don't forget to screw the cap on
again tightly.
Subsequent work
Subsequent work - topping up engine oil
