Boxster S (987) F6-3.4L (2008)
1. Raise the vehicle at the prescribed jacking points.
2. Remove support plate.
3. Place oil collection pan under the transmission.
Changing ATF
Draining ATF
Caution: Oil fill level too low
^
Risk of damage to components
--> Do not start engine.
--> Do not tow the vehicle.
Warning: Danger of scalding and chemical burns from hot ATF
--> Allow ATF to cool down
--> Wear personal protective gear (goggles, gloves)
1. Unscrew ATF drain plug -1- and drain ATF.
Automatic transmission drain and filler plugs
2. Replace sealing ring for drain plug and tighten screw. --> Tightening torque: 30 ftlb.
Topping up ATF
Caution: Oil fill level too low
^
Risk of damage to components
--> Do not start engine.
--> Do not tow the vehicle.
Warning: Danger of scalding and chemical burns from hot ATF
--> Allow ATF to cool down
--> Wear personal protective gear (goggles, gloves)
1. Unscrew the ATF filler plug -2- and fill up with ATF using ATF filling device V.A.G. 1924 00000 until surplus ATF escapes at the hole of the
ATF filler plug.