Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-659028.png)
INFORMATION: Only in the cabriolet.
18. Push in connector for rod antenna -23- until it is felt to engage.
19. Push on connector for tank filler neck -22-.
20. Push on connector for filler flap switching element -21- until it is felt to engage.
21. Push on connectors of front antenna for tyre pressure monitoring system -19 and 20- at left and right until they are felt to engage.
22. Lay and connect ABS wire harness, front left and right -17 and 18-.
22.1. Laying ABS wire harness
22.2. Tighten fastening screw of connector socket. - Tightening torque: 10 Nm (7.5 ft. lbs.)
22.3. Lock the plug connection securely.
23. Push through main wire harness in direction of luggage compartment.
24. Fit grommets -16- left and right.
25. Clip in wire harness to CD changer/navigation unit -arrows-.
26. Clip in wire harness to loudspeaker amplifier -Arrows A- and fix with new adhesive tape -Arrow B-.
27. Clip in wire harness for front end control unit -arrow-.
28. Push on connector for tyre pressure monitoring system control unit -15- until it is felt to engage.
29. Push on connector for brake fluid sender -14- until it is felt to engage.
30. Push on connector for hydraulic unit -13- and lock it.
31. Push together plug connection between main wire harness and front-end wire harness, left -12- until it engages securely. Clip in connector socket.
