Boxster S (987) F6-3.4L (2008)
2. Release locking mechanism on the wire harness plug connection for door -arrow A- and disconnect wire harness plug connection for door -arrow
B-.
3. Remove rubber sleeve and pull out together with the wire harness for door from the A-pillar.
Removing wire harness for door
1. Remove door sub-frame.
2. Release connector on bass loudspeaker -arrows a- and pull off.
3. Unclip wire harness for door at the five retaining clips -arrows A-. Remove both rubber sleeves -arrow B- and take off wire harness for door.
Removing wire harness for door trim panel