Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-378003.png)
MOST control units, variant A - B - D - F
MOST control units, variant A - B - E - F
Installing optical waveguide
Disconnecting optical waveguide
INFORMATION: Observe the general information on optical waveguides.
CAUTION: Risk of destruction when removing electric components with the ignition on.
-
Switch off ignition and remove ignition key.
2. Release the connectors of the damaged optical waveguides on the affected components -Arrow a- and disconnect them. The illustration shows the
connector on the CD changer as an example.
3. Cut off the connector of the damaged optical waveguide, isolate it and tie it to the main wire harness.
Removing and installing optical contacts on connector side
1. Open the secondary locking mechanism using the press-out and unlocking tools for tab and round plug connectors of all sizes NR.155. Insert the
tool in the opening provided and lift the locking mechanism. The locking mechanism engages in the upper position.
