Boxster S (987) F6-3.4L (2008)
Fuel Rail: Service and Repair
Removing And Installing Fuel Ring Pipe
Technical values
Preliminary work for removing fuel ring pipe
DANGER:
Vehicle raised incorrectly.
-
Danger of fatal injury or material damage should the vehicle fall down.
-
Raise the vehicle at the prescribed jacking points.
1. Place protective covers on the vehicle to avoid damaging the body.
2. Disconnect battery ground lead.
3. Remove engine compartment lid.
4. Remove air-cleaner element.
5. Remove rear underbody cover.
Removing fuel ring pipe
DANGER:
Fuel can escape when fuel line is disconnected.
-
Risk of fatal injury.
-
Damage to skin.
-
Do not work on fuel system if engine is hot.
-
Do not smoke, avoid fire and naked flames.
-
Wear fuel-resistant protective gloves and goggles.
-
Attach warning sign to vehicle in a clearly visible position.
1. Release and disconnect fuel lines -arrow-. Collect emerging fuel in a suitable container.
2. Unclip fuel line from the bracket -1-.
3. Disengage shift and selector cables or selector lever cable (Tiptronic) and place on the protective cover for the luggage-compartment lid.
View of shift and selector cables for 3.2-litre manual transmission