porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Seat Occupant Classification Module - Air Bag|Testing and Inspection|Page 151 > < Restraints - Air Bag Lamp ON/Various DTC's Set|Page 147
Page 1
background image

Seat Occupant Classification Module - Air Bag: Testing and Inspection

Calibrating AWS Control Unit

Tools

Technical values

Calibrating AWS control unit

INFORMATION:  A system test can only be performed successfully if:

-

There are no faults in the AWS and airbag control unit.

INFORMATION:

-

Calibration applies to vehicles as of MY '06 with country equipment (USA, Canada, Mexico).

-

Follow the instructions on the Tester.

Later versions of the software may display slightly different text or require a slightly different procedure. The instructions you receive from the tester
itself take precedence over this description.

WARNING:  Incorrect information for the AWS control unit

-

Passenger's airbag is triggered incorrectly
-

Calibrate the AWS control unit if the passenger's seat was removed and re-installed, or if the seat bracket or AWS control unit was
replaced.

-

Do not loosen the safety screws on the AWS sensors or seat frame.

-

Only replace retainer plate for seat adjustment motor on vehicles without AWS sensors.

-

Always replace the retainer plate together with the seat frame on vehicles with an AWS sensor.

Seat Occupant Classification Module - Air Bag|Testing and Inspection|Page 151 > < Restraints - Air Bag Lamp ON/Various DTC's Set|Page 147