porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Air Bag Systems > < Repairs and Inspections Required After a Collision|Service and Repair|Page 3596
Page 4
background image

Airbag unit, driver's side:

1. Contact unit.
2. Airbag unit, driver's side.
3. Triggering unit after the third time the airbag is triggered.

Airbag unit, passenger's side:

1. Airbag unit, passenger's side.
2. Triggering unit after the third time the airbag is triggered.
3. Instrument panel.
4. Check instrument panel bracket for deformation and replace if necessary.

Side-airbag unit, seat:

1. Side-airbag unit, seat.
6. Seat covering, deformed seat components.
7. Sensor for the side-airbag unit after the third time the side-airbag is triggered

Head airbag unit, door:

1. Head airbag unit.
9. Check door unit carrier for deformation and replace if necessary.

10. Sensor for the side-airbag unit after the third time the side-airbag is triggered

Belt tensioner:

1. All belt tensioner units.

Because it is difficult to visually determine if one or more belt tensioners has been triggered, check the following points:

-

Using the PIWIS Tester 9718, read out the fault memory.

-

Check plug connection on the belt tensioner for damage.

-

Pull out the belt strap as far as possible and check for wear.

-

Perform a function test on the automatic belt device.

Air Bag Systems > < Repairs and Inspections Required After a Collision|Service and Repair|Page 3596