Boxster S (987) F6-3.4L (2008)
4.1. Unscrew fastening screw -1-.
4.2. Pull front belt lock -2- out through the opening on the seat shell -arrow A-.
4.3. Pull wire harness -3- out through the seat frame -arrow B-.
Installing front belt lock
DANGER: Loosen the safety-related threaded joint.
-
Danger of injury if belt lock is not screwed on correctly.
-
Always replace fastening screw on belt lock after customer service and reworking.
-
Never make alterations to the micro-self-locking screws (e.g. never use lubricant, loosen bolts, and screw them down again).
1. Install front belt lock.
1.1. Guide front belt lock -2- in through the opening on the seat shell -arrow A-.
1.2. Secure front belt lock -2- with the fastening screw -1-. Tightening torque: 35 Nm (26 ftlb.) ± 5 Nm ( ± 3.5 ftlb.)
1.3. Pull wire harness -3- through the seat frame -arrow B-.
2. Join connector socket.
2.1. Push the single connectors -3- into the connector socket -1- ( -arrow- ) until the single connectors engage securely.
2.2. Secure the wire harness with a new tie-wrap -2- on the connector socket -1-.