Boxster S (987) F6-3.4L (2008)
Tow Sensor: Service and Repair
Removing And Installing Tilt Sensor Control Unit
Preliminary work
Remove centre console cover.
Removing tilt sensor control unit
INFORMATION: The tilt sensor is integrated into the tilt control unit and cannot be separately replaced.
WARNING:
Risk of damage to electronic control modules.
-
If care is not taken, electrical and electronic components may be destroyed.
-
Before removing the control module, switch off the ignition and remove the ignition key.
1. Switch off ignition and remove ignition key.
2. Unscrew the two fastening nuts -1- and remove the tilt sensor control unit.
3. Remove the two sheetmetal nuts -2- from the tilt sensor control unit.