porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Wiring Harness|Testing and Inspection|Page 2771 > < Power Interrupt Connector/Switch|Service and Repair|Page 2767
Page 1
background image

Wiring Harness: Testing and Inspection

Eliminating Noise Symptoms - Reworking Wire Harness For Battery Wiring

Technical values

General information

Symptoms

Clicking noises (fuel injectors) when the engine is warm and cold.

Causes and remedial action

The ground strap is touching the valve cover and transmits the fuel injector noises to the passenger compartment when the engine is warm and cold.

In the event of a complaint, the ground strap must be fitted in the bracket for the valve cover to remedy the situation on vehicles manufactured before the
date of introduction February 2007.

Preliminary work

1. Remove rear underbody cover.

Reworking wire harness for battery wiring

Reworking ground strap on engine

WARNING:
Engine is hot.

-

Danger of burns.

-

Only work on engine when it is cold.

-

Wear protective clothes, gloves and goggles.

Wiring Harness|Testing and Inspection|Page 2771 > < Power Interrupt Connector/Switch|Service and Repair|Page 2767