Boxster S (987) F6-3.4L (2008)
Removing steering return line
1. Loosen return line (thicker line) at the connection point (plug-in coupling) -arrow- in the rear sill area on the left.
Plug-in coupling for pressure and return lines
1.1.
Remove circlip -D- from return line (thicker line) -1-. Loosen plug-in coupling (screw on). When loosening, turn at the threaded joint -A- and
counter at the hexagon on the plug-in coupling -B-.
Loosening plug-in coupling on return line
1.2.
Collect hydraulic fluid in a container.
2. Loosen pressure and return lines at the steering gear. To do this, loosen the hexagon socket head bolt -arrow- and remove the retainer plate (with
the front wheels turned in as required). Close off lines or use a collecting container.
Retainer plate
3. Open line bracket -arrow-, unclip return line and remove it.