Boxster S (987) F6-3.4L (2008)
Intake-air distributor
3. Remove left intake-air distributor.
4. Loosen belt pulley.
Loosen screws on pulley, see -Arrows-.
5. Remove drive belt and pulley.
Unscrew screws on pulley, see -Arrows-, and remove pulley.
Belt pulley
6. Drain hydraulic fluid at underbody connection point.
The following steps must be completed in order to drain the hydraulic fluid:
6.1.
Remove rear underbody panel.
Replace fastening nuts -2- following removal.
Removing cover for rear underbody
6.2.
Remove underbody panel at the left side.
Replace fastening nuts -3- following removal.