Boxster S (987) F6-3.4L (2008)
8. Secure belt pulley.
Tighten screws -Arrows-.
--> Tightening torque: +23 Nm (+17 ftlb.)
9. Install left intake-air distributor.
10. Install resonance tube and throttle housing with distributor pipe.
Tighten screw-type hose clamps in correct position.
Installation position for intake-air distributor screw-type hose clamps
11. Fill in hydraulic fluid, bleed the power steering and check for leaks.
Checking steering fluid
Subsequent work
1. Install engine compartment cover.
2. Install rear wall cover.
3. Install left front seat.