porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Wheels and Tires|Service and Repair > < Tire Pressure Sensor|Service and Repair|Page 3363
Page 1
background image

Tires: Specifications

Tire pressure for cold tires (approx. 20 °C) - all Boxster and Cayman models

Danger: Tire damage due to insufficient tire pressure in conjunction with driving at high speeds, due to tires that are too old and/or tires
which do not meet Porsche requirements.
^

Increased risk of accidents.

--> Adjust the tire pressure according to specifications. Never allow the pressure to fall below the minimum pressure.
--> Carry out a visual inspection and check tire age. Replace tires older than 6 years.
--> Use only tires recommended by Porsche.

Information: Valve caps protect the valve from dust and dirt and therefore from leaks! Always screw caps tight and replace any missing caps.

^

Spare wheel/collapsible wheel not available! However there is a tire repair kit in the luggage compartment which can be used to repair the
damaged tire in the event of damage!

^

For repairs in the event of damage, observe without fail the safety and operating instructions!

The chart of tires and wheels for summer and winter should be taken from Technical Information (TI) Group 4!

When replacing summer tires, pay close attention to the tire specification number! The specification characters N1, N2, N3 or N0 distinguish the
summer tires specially authorized by Porsche from other models of the same tire type and size!

Notes on mounting tires

^

When fitting tires, the direction of rotation and the inner and outer sides should be noted!

^

If there are no mounting instructions on the tire sidewall, the tire must be mounted so that the DOT code is visible from the outside.

Wheels and Tires|Service and Repair > < Tire Pressure Sensor|Service and Repair|Page 3363