Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-487002.png)
Preliminary work
Preliminary work
1. Raise the vehicle at the prescribed jacking points.
2. Remove support plate.
3. Place oil collection pan under the transmission.
Draining ATF
Caution: Oil fill level too low
^
Risk of damage to components
--> Do not start engine.
--> Do not tow the vehicle.
Warning: Danger of scalding and chemical burns from hot ATF
--> Allow ATF to cool down
--> Wear personal protective gear (goggles, gloves)
1. Unscrew ATF drain plug -1- and drain ATF.
Automatic transmission drain and filler plugs
2. Replace sealing ring for drain plug and tighten screw. --> Tightening torque: 30 ftlb.
Removing ATF pan
Removing ATF pan
1. Remove screws -1-.
ATF pan
2. Remove ATF- pan -2- with seal -3-. Pay attention to the magnet -4-.
