Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-493013.png)
Pressing in halfshaft flange
3. Fit circlip.
Circlip
Subsequent work
Subsequent work
1. Install long halfshaft flange.
2. Top up oil for final drive.
3. Fit support plate.
4. Lower the vehicle.
Porsche Workshop Service and Repair Manuals
Sensors and Switches - A/T >
< Removing and Installing Sealing Ring For Right-Hand Halfshaft Flange|Page 2127
Page 13
