Boxster S (987) F6-3.4L (2008)
Shifter A/T: Service and Repair
Removing and Installing Selector Knob
WM 370419 Removing and installing selector knob
Removing selector knob
Removing selector knob
Information: The ignition key must be in position 1 before the locking button can be pressed.
1. Press locking button and release lug under the locking button in direction of travel using an Allen key, for example.
Levering locking button off
2. Pull off locking button against the direction of travel.
Pulling off locking button
3. Use a screwdriver to lever the spring clip out of the lock.
Detaching spring clip