Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-502003.png)
Coolant line
Information: If necessary, use a mirror when screwing in and unscrewing the top screws.
6. Unscrew fastening screws between ATF cooler and port plate and remove ATF cooler.
ATF cooler
7. Unscrew fastening screws between port plate and transmission housing and remove port plate.
Port plate
Installing port plate for ATF cooler
Installing port plate for ATF cooler
1. Position port plate with new sealing rings on transmission housing and screw in fastening screws.
