Boxster S (987) F6-3.4L (2008)
Valve Body: Service and Repair
Removing and Installing Control Mechanism For Transmission
WM 387719 Removing and installing control mechanism for transmission
Information
Notes
Information: Fill only with ATF approved by Porsche. See Spare Parts Catalogue.
Information: Hot vehicles should cool down before beginning the activity.
Information: Vehicle must be horizontal in order to be filled and checked.
Preliminary work
Preliminary work
1. Raise the vehicle at the prescribed jacking points.
2. Remove support plate.
3. Drain ATF.
4. Remove ATF pan.
5. Remove ATF filter.
Removing control mechanism for transmission
Removing control mechanism for transmission
1. Pull off securing clasp for wiring harness plug.