Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-544001.png)
Seals and Gaskets: Service and Repair
Removing and Installing Sealing Ring For Right-Hand Halfshaft Flange
WM 392219 Removing and installing sealing ring for right-hand halfshaft flange
Preliminary work
Preliminary work
1. Raise the vehicle at the prescribed jacking points.
2. Remove support plate.
3. Remove right halfshaft flange.
Removing sealing ring for halfshaft flange
Removing sealing ring for halfshaft flange
1. Lever the sealing ring out of the transmission.
Levering out the sealing ring
Installing sealing ring for halfshaft flange
Installing sealing ring for halfshaft flange
1. Thinly coat sealing lip and outer circumference of sealing ring with Vaseline and place the sealing ring on pressure piece 9738.
2. Drive sealing ring into the transmission using pressure piece 9738.
