Boxster S (987) F6-3.4L (2008)
Installing double sealing ring
1. Check seat of sealing ring in transmission housing for damage.
2. Thinly coat outer circumference and sealing lips of sealing ring with Vaseline.
3. Push double sealing ring on so that the projecting sealing lip is pointing towards the pressure piece 3383.
Pushing on the sealing ring
4. Drive double sealing ring into the transmission housing up to the stop with pressure piece 3383.
Tapping in sealing ring
Subsequent work
Subsequent work
1. Install differential.
2. Top up oil for final drive and perform all assembly work described.
3. Retaining device P 9624/1 must then be removed from crossmember.
Special tool
4. Fit restraining cables to crossmember.