Boxster S (987) F6-3.4L (2008)
Removing sealing ring
Installing sealing ring
Installing sealing ring
1. Thinly coat sealing lip and outer circumference of sealing ring with Vaseline and place the sealing ring on pressure piece 3382.
2. Drive in sealing ring with pressure piece 3382.
Tapping in sealing ring
Subsequent work
Subsequent work
1. Install short halfshaft flange.
2. Check oil for final drive and top up if necessary.
3. Fit support plate.
4. Lower the vehicle.
Removing and Installing Sealing Ring For Long Halfshaft Flange
WM 392219 Removing and installing sealing ring for long halfshaft flange