Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-545007.png)
Circlip
2. Press halfshaft flange out of mounting saddle.
Pressing out halfshaft flange
3. Press sealing ring out of mounting saddle using a suitable tool.
Installing sealing ring
Installing sealing ring
1. Drive in new sealing ring as far as it will go using pressure piece 9615 and pull-in tool and extractor 254.
Tapping in sealing ring
2. Press mounting saddle with assembly sleeve 9263 and thrust washer VW 511 onto the halfshaft flange.
